Skip to main content
Benjamin Moore Collingwood 859

Collingwood

Benjamin Moore

859

About Collingwood by Benjamin Moore

Collingwood 859 by Benjamin Moore is a mid warm shade with a simple, inviting feel. It shows brightness around 62% and hue near 40° for steady results across rooms. Adds comfort to living rooms, dining rooms, and bedrooms. Pairs nicely with soft whites, creams, and gentle grays.

Brightness: 62%

Tone: Warm

HEX: #d3cec4

RGB: 211, 206, 196

Hue40°

Saturation15%

Lightness80%

Similar Colors by Benjamin Moore

These are close matches to Collingwood from the same brand. They keep a similar look and work well in the same type of rooms.

Frequently asked questions

Quick answers about how Collingwood looks in real rooms, how it behaves with light, and how it pairs with other shades.

Is Collingwood 859 a warm or cool color?
Collingwood by Benjamin Moore is a warm mid tone color. It will usually read warm in most homes rather than a sharp pure white.
What type of color is Collingwood?
Collingwood sits in the yellow or beige family. Its hue is about 40°, which keeps it in that range on the color wheel.
What are the color stats for Collingwood?
Brightness is about 62%. Saturation is around 15%. Lightness (HSL L) is roughly 80%. Hue is close to 40°. The hex value is #d3cec4. The RGB value is 211, 206, 196.
Is Collingwood better for dark rooms or bright rooms?
Collingwood has brightness around 62%. It sits in the middle, so it can work in both darker and brighter rooms if you balance the lighting.
Which colors go with Collingwood?
You can match Collingwood with simple whites for trim and ceiling, or with nearby neutrals from the same brand. The similar colors and complementary colors on this page are a good starting point for pairing.
Where does Collingwood work best in a home?
Collingwood works well as an accent on one or two walls, in cozy rooms, or in spaces with stronger daylight where a deeper color will not feel heavy.
How does Collingwood compare to a pure white paint?
Collingwood is softer than a pure untinted white. The warm undertone and mid tone color feel more gentle on the eye, so it tends to look calmer and less stark on large walls.

Lighter Shades by Benjamin Moore

These lighter shades sit above Collingwood in brightness. They give a softer feel without drifting far from the same family.

Darker Shades by Benjamin Moore

These colors drop a bit below Collingwood in brightness. They can add depth without leaving the same style.

Complementary Colors by Benjamin Moore

These colors sit on the opposite side of the color wheel from Collingwood. They add contrast without clashing.

Alternate Colors by other brands

These colors from other brands have a similar look to Collingwood. They are helpful if you switch between brands or match to a contractor’s paint line.